From: Warakorn Sae-Tang (kornrono@gmail.com)
Date: Fri Mar 06 2009 - 12:12:17 ARST
On Fri, Mar 6, 2009 at 12:30 PM, Cisco certification <ccielab@groupstudy.com
> wrote:
> Hi,
>
> You have tried to post to a GroupStudy.com certification mailing list.
> Because
> the server does not recognize you as a confirmed poster, you will be
> required
> to authenticate that you are using a valid e-mail address and are not a
> spammer. By confirming this e-mail you certify that you are not sending
> Unsolicited Bulk Email (UBE).
>
> PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
> YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
>
>
> By confirming this e-mail you also certify the following:
>
> 1. The message does NOT break Cisco's Non-Disclosure requirements.
>
> 2. The message is NOT designed to advertise a commercial product.
>
> 3. You understand all postings become property of GroupStudy.com
>
> 4. You have searched the archives prior to posting.
>
> 5. The message is NOT inflammatory.
>
> 6. The message is NOT a test message.
>
> To confirm, simply reply to this message. No editing is necessary. Once
> confirmed, you will be able to post without additional confirmations.
>
>
> Welcome to GroupStudy.com!
>
>
> First time posters to GroupStudy.com are required to agree to the
> GroupStudy terms and conditions.
> Replying to this email, certifies you have read and agree to the GroupStudy
> posting guidelines and terms and conditions.
>
> --- Original Message Follows ---
>
> Date: Fri, 6 Mar 2009 12:30:20 +0700
> Subject: CiscoWorks LMS3.0 and Change Server's name Issue
> From: Warakorn Sae-Tang <kornrono@gmail.com>
> To: ccielab@groupstudy.com
>
> Hi Friend,
>
> I've some question about CiscoWorks LMS3.0 and later version. If I've
> already installed LMS3.0 and build complete Database (such as DCR, Campus
> and RME data). After that I have to change my Server name. Are there any
> problem with my LMS3.0 Database and Service or not?
>
> My friend told me that we can change it via LMS command line, but from her
> experience (LMS2.6) her server had bad affect to LMS GUI. I'm not sure that
> this affect still happen with LMS3.0 or not?
>
> Best Regards,
> Korn.
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART