From: Tyson Scott (tscott@ipexpert.com)
Date: Tue Mar 03 2009 - 23:52:19 ARST
What does the show ip mroute look like on the next hop R8? Please show the
configuration of both.
Regards,
Tyson Scott - CCIE #13513 R&S and Security
Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Cell: +1.248.504.7309
Fax: +1.810.454.0130
Mailto: tscott@ipexpert.com
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand
and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE
Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage
Lab Certifications.
-----Original Message-----
From: alex@eml.cc [mailto:alex@eml.cc]
Sent: Sunday, March 01, 2009 12:47 PM
To: CCIE R/S, Groupstudy; CCIE, R/S OSL
Cc: Tyson Scott
Subject: [OSL | CCIE_RS] Vol 1 Section 17 task 20
Hello tyson,
Hello everyone,
i having some problem with this step.
LAB tell follow:
"make sure that admin scoped multicast group do not enter o leave your
multicast domains. maintain previous rp assignments but don't share with
bb router"
namely each domain should have just own address multicast ( I think CAT2
haven't to see address form R1)
I have done same solution with proctor, more o less I think.
Cat3560-2#sh ip ro os | i via 100.100.200.8
O 100.100.100.0 [110/132] via 100.100.200.8, 00:00:16, Vlan200
O 100.100.250.0 [110/131] via 100.100.200.8, 00:00:16, Vlan200
O 200.0.0.8 [110/2] via 100.100.200.8, 00:00:16, Vlan200
O 200.0.0.9 [110/131] via 100.100.200.8, 00:00:16, Vlan200
O 200.0.0.1 [110/132] via 100.100.200.8, 00:00:16, Vlan200
O 200.0.0.2 [110/131] via 100.100.200.8, 00:00:16, Vlan200
O 200.0.0.4 [110/195] via 100.100.200.8, 00:00:16, Vlan200
O 200.0.0.5 [110/67] via 100.100.200.8, 00:00:16, Vlan200
O 200.0.0.6 [110/67] via 100.100.200.8, 00:00:16, Vlan200
O 200.0.0.7 [110/66] via 100.100.200.8, 00:00:16, Vlan200
O 150.100.220.0 [110/66] via 100.100.200.8, 00:00:16, Vlan200
O 150.100.221.0 [110/66] via 100.100.200.8, 00:00:16, Vlan200
O 150.100.100.0 [110/130] via 100.100.200.8, 00:00:16, Vlan200
O 150.100.81.0 [110/2] via 100.100.200.8, 00:00:16, Vlan200
O 150.100.91.0 [110/131] via 100.100.200.8, 00:00:16, Vlan200
O 150.100.69.0 [110/130] via 100.100.200.8, 00:00:16, Vlan200
O 150.100.78.0 [110/65] via 100.100.200.8, 00:00:17, Vlan200
O 150.100.34.0 [110/3] via 100.100.200.8, 00:00:17, Vlan200
O 150.100.40.0 [110/195] via 100.100.200.8, 00:00:17, Vlan200
O 150.100.41.0 [110/195] via 100.100.200.8, 00:00:17, Vlan200
O 150.100.24.0 [110/194] via 100.100.200.8, 00:00:17, Vlan200
O 150.100.25.0 [110/130] via 100.100.200.8, 00:00:17, Vlan200
O 150.100.12.0 [110/131] via 100.100.200.8, 00:00:17, Vlan200
Cat3560-2#sh runn int t0
Building configuration...
Current configuration : 180 bytes
!
interface Tunnel0
ip address 10.10.20.12 255.255.255.0
ip mtu 1500
ip pim sparse-mode
ip ospf mtu-ignore
tunnel source 100.100.200.12
tunnel destination 100.100.200.8
end
Cat3560-2#sh runn | i pim|mro
ip pim sparse-mode
ip pim sparse-mode
no ip mroute-cache
ip pim rp-candidate Tunnel0 priority 255
ip mroute 100.100.200.8 Tunnel0
R8#sh runn int t0
Building configuration...
Current configuration : 166 bytes
!
interface Tunnel0
ip address 10.10.20.8 255.255.255.0
ip pim sparse-mode
ip ospf mtu-ignore
tunnel source 100.100.200.8
tunnel destination 100.100.200.12
Neverthless mroute table of CAT is empty.
however I think, i should see somethink like that:
Group(s) 224.0.0.0/4
RP 10.10.20.12
Info source: 150.100.81.13 priority 200
RP 150.100.34.14
Info source: 150.100.81.13via boot priority 200
because cat2 non availeble
ANy idea to about, or different for separate net R1-2-4-6-7-9 from
domain CAT's?
-- This message is intended for the individual(s) to whom it is addressed and may contain information that is privileged or confidential. If you are not the addressee you must not read,use or disclose the contents of this email. Whilst all reasonable care has been taken to avoid the transmission of viruses, the recipient should carry out virus and other checks, as they consider appropriate. Myself accepts no responsibility in this regard.Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART