From: Farrukh Haroon (farrukhharoon@gmail.com)
Date: Mon Mar 02 2009 - 10:19:47 ARST
1) If you console to the SUP you can use the 'switch console' command to
move to the MSFC console (and using CTRL-C-C-C to get back). I don't think
you can switch in case of telnet.
2) Same as above. You can't go to the host box from within the FWSM telnet
session AFAIK. However you can access the FWSM from the switch console
using the 'session slot x processor 0' command.
Regards
Farrukh
On Mon, Mar 2, 2009 at 3:08 PM, operator sid <ccie1@live.co.uk> wrote:
> Hi Group
>
>
>
> On a Cat6500 in hybrid mode, if you have telnetted directly to the MSFC and
> want to get onto the switch processor, how can you do this if you dont know
> the IP of the switch processor
>
>
>
> Also if you telnet to a FWSM and want to get onto it Switching engine, but
> dont know its IP, how can you do this from the FWSM?
>
>
>
> Thanks in advance
>
> _________________________________________________________________
> View your Twitter and Flickr updates from one place Learn more!
> http://clk.atdmt.com/UKM/go/137984870/direct/01/
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:03 ART