From: Peter Chuba (ptchuba@live.com)
Date: Mon Mar 02 2009 - 01:50:21 ARST
It's EIGRP. I'll try to summarize. It's like this:
SW1--(.7)---147.1.37.0/24----(.3)---R3
|
|
L0 150.1.7.7/24
SW1 and R3 are running EIGRP over their directly connected link. SW1 is
redistributing connected interface L0 into EIGRP.
R3's EIGRP config
router eigrp 100
network 145.1.37.3 0.0.0.0
distance 119 145.1.37.7 0.0.0.0 SW1_LOOPBACK
no auto-summary
!
ip access-list standard SW1_LOOPBACK
permit 150.1.7.0 0.0.0.255
Yet I don't see this in the routing table of R3. Still shows 170.
150.1.0.0/24 is subnetted, 5 subnets
D EX 150.1.7.0 [170/409600] via 145.1.37.7, 00:00:03, Ethernet0/0
R 150.1.6.0 [120/1] via 145.1.136.6, 00:00:06, Ethernet0/1
D EX 150.1.5.0 [170/2560028416] via 145.1.37.7, 00:00:03, Ethernet0/0
Thanks
-----Original Message-----
From: Dale Shaw [mailto:dale.shaw@gmail.com]
Sent: Monday, March 02, 2009 4:35 AM
To: Peter Chuba
Cc: Cisco certification
Subject: Re: Distance command clarification
Hi Peter,
Which routing protocol are you talking about? There are some subtle
differences, but as far as I've experienced, the DocCD covers the
usage adequately.
Also, it might help if you posted some real examples of what has/has
not worked for you.
cheers,
Dale
On Mon, Mar 2, 2009 at 2:29 PM, Peter Chuba <ptchuba@live.com> wrote:
> Hi,
>
> I don't quite understand this command and Cisco's documentation is not
very
> clear to me.
>
> distance distance ip-address wildcard-mask [ip-standard-acl |
> ip-extended-acl | access-list-name]
>
> What do the IP address and access-list represent. I was thinking the IP is
> that of the advertising router and the access-list specifies a route
prefix.
> Yet I have tried this in a lab and can't set the distance for a specific
> route from a specified neighbor.
> Can someone please clarify me?
>
> Thanks
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:03 ART