From: Pavel Bykov (slidersv@gmail.com)
Date: Mon Feb 23 2009 - 07:26:09 ARST
From experience older combinations of IOS/HW ask for that, while newer do
not.
It might be something from an old era of operating with flash fs (e.g. on
2500 you had to change confreg to be able to write to flash)
But this is only suspicion, there might be some parameter like Nick pointed
out, but I'm not sure if it's prompting that's the problem, because what
will be the default response if it's "quiet"?
On Mon, Feb 23, 2009 at 7:23 AM, Evan Weston <evan_weston@hotmail.com>wrote:
> Hi all,
>
>
>
> I have a few 2811 routers in my lab. On two of them if I issue "copy start
> flash:template.conf" it just copies but on the third one I get a dialogue
> "Erase flash: before copying?" just curious as to where this is turned on
> and off since some routers do it and others do not. Tried googling it and
> people just say hit"n" so you don't erase your IOS.
>
>
>
> Cheers!
>
> Evan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Pavel Bykov ---------------- Don't forget to help stopping the braindumps, use of which reduces value of your certifications. Sign the petition at http://www.stopbraindumps.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST