From: Pavel Bykov (slidersv@gmail.com)
Date: Fri Feb 20 2009 - 10:19:20 ARST
First one sets field in both V6 and V4.
Second only sets in V4
On Fri, Feb 20, 2009 at 5:32 AM, dave dave <funccie@gmail.com> wrote:
> Hi Expert,
>
> What is difference the below two in term of the case/solution?
>
> r1(config-pmap-c)#set ?
> atm-clp Set ATM CLP bit to 1
> cos Set IEEE 802.1Q/ISL class of service/user priority
> discard-class Discard behavior identifier
> * *dscp Set DSCP in IP(v4) and IPv6 packets
> fr-de Set FR DE bit to 1
> ip Set IP specific values
> mpls Set MPLS specific values
> * precedence Set precedence in IP(v4) and IPv6 packets
> * qos-group Set QoS Group
> r1(config-pmap-c)#set ip ?
> dscp Set IP DSCP (DiffServ CodePointint)
> *precedence Set IP precedence*
> r1(config-pmap-c)#set ip
>
> Regards,
> dave
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Pavel Bykov ---------------- Don't forget to help stopping the braindumps, use of which reduces value of your certifications. Sign the petition at http://www.stopbraindumps.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST