Re: QoS Difference "set ip precedece" & "set precedence"

From: Raghav Bhargava (raghavbhargava12@gmail.com)
Date: Fri Feb 20 2009 - 02:38:53 ARST

hi dave,

what is the ios version you are using on device ???

raghav

On Thu, Feb 19, 2009 at 8:32 PM, dave dave <funccie@gmail.com> wrote:
> Hi Expert,
>
> What is difference the below two in term of the case/solution?
>
> r1(config-pmap-c)#set ?
> atm-clp Set ATM CLP bit to 1
> cos Set IEEE 802.1Q/ISL class of service/user priority
> discard-class Discard behavior identifier
> * *dscp Set DSCP in IP(v4) and IPv6 packets
> fr-de Set FR DE bit to 1
> ip Set IP specific values
> mpls Set MPLS specific values
> * precedence Set precedence in IP(v4) and IPv6 packets
> * qos-group Set QoS Group
> r1(config-pmap-c)#set ip ?
> dscp Set IP DSCP (DiffServ CodePointint)
> *precedence Set IP precedence*
> r1(config-pmap-c)#set ip
>
> Regards,
> dave
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Warm Regards
Raghav

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST