From: Andy Hogard (andyhogard@gmail.com)
Date: Wed Feb 18 2009 - 18:22:52 ARST
Actually, bgp summarization and sync were disabled by default from 12.2
onwards. If you still encounter false documentation on the doc cd about
eigrp, perhaps its time to point them the error ..they would be glad to fix
it.
Greets!
On Thu, Feb 19, 2009 at 1:43 AM, Jonathan Greenwood II <gwood83@gmail.com>wrote:
> EBDBSC231#sh ver
> Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version
> 12.4(15))
> EBDBSC231#config t
> Enter configuration commands, one per line. End with CNTL/Z.
> EBDBSC231(config)#router eigrp 1010
> EBDBSC231(config-router)#end
> EBDBSC231#sh run | s router eigrp 1010
> router eigrp 1010
> auto-summary
> EBDBSC231#
>
> Auto-summary is default with EIGRP and this was done on a 2821 with 12.4
> code
>
> HTH
>
> Jonathan
> #22744
> On Wed, Feb 18, 2009 at 11:51 AM, ALL From_NJ <all.from.nj@gmail.com>
> wrote:
>
> > I can not do a quick lab test now, I am on a trip and away from my rack
> for
> > the next two days (I sorely miss my rack ;( ...
> >
> > ... The doc CD says that auto-summary is disabled by default after IOS
> > 12.2(8)T ... basically 12.3 mainline and above for most customers. I
> type
> > no auto on every router I confirgure and do not think I have actually
> tested
> > if the new default behavior ...
> >
> >
> >
> http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_eig1.html#wp1011150
> >
> > If you can test it, can you lab this up?
> >
> >
> >
> > On Wed, Feb 18, 2009 at 2:32 PM, Jonathan Greenwood II <
> gwood83@gmail.com>wrote:
> >
> >> Eigrp summarizes by default as well. You have to manually disable with
> >> "no auto-summary"
> >>
> >>
> >> On Wed, Feb 18, 2009 at 11:14 AM, ALL From_NJ <all.from.nj@gmail.com
> >wrote:
> >>
> >>> For all three - summarizes on network boundaries ...
> >>>
> >>> With BGP and EIGRP, auto-summary is disabled by default. W/ RIP
> >>> auto-summary is enabled. I kind of got in the habit of always typing
> "no
> >>> auto" for all routing protocols ... , but if you did not, then w/ RIP
> >>> this
> >>> might be a 'gotcha'.
> >>>
> >>> HTH,
> >>>
> >>> Andrew
> >>>
> >>>
> >>>
> >>> On Wed, Feb 18, 2009 at 12:49 PM, Bhuvanesh Rajput <ashu2084@gmail.com
> >>> >wrote:
> >>>
> >>> > Hi,
> >>> >
> >>> > Can anybody explain the functioning of auto-summary with EIGRP, RIP
> >>> and
> >>> > BGP?
> >>> > or
> >>> > How does it work differently in each routing protocol?
> >>> >
> >>> >
> >>> >
> >>> > Cheers!
> >>> >
> >>> > Bhuvanesh Rajput
> >>> >
> >>> >
> >>> > Blogs and organic groups at http://www.ccie.net
> >>> >
> >>> >
> _______________________________________________________________________
> >>> > Subscription information may be found at:
> >>> > http://www.groupstudy.com/list/CCIELab.html
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>>
> >>>
> >>> --
> >>> Andrew Lee Lissitz
> >>> all.from.nj@gmail.com
> >>>
> >>>
> >>> Blogs and organic groups at http://www.ccie.net
> >>>
> >>> _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >> --
> >> Jonathan Greenwood II
> >> CCIE #22744
> >>
> >
> >
> >
> > --
> > Andrew Lee Lissitz
> > all.from.nj@gmail.com
> >
>
>
>
> --
> Jonathan Greenwood II
> CCIE #22744
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- My Blog URL: http://ccieno.blogspot.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:11 ARST