From: Alexei Monastyrnyi (alexeim73@gmail.com)
Date: Tue Feb 17 2009 - 08:53:45 ARST
Hi Bogdan.
There was a discussion about it on GS in January. 10 is a typo, 1 is a
correct one for default information originate instruction..
HTH,
A.
Bogdan Georgescu wrote:
> Hello,
>
> In order to generate a default external route into OSPF you use the
> default-information originate command. According to the IP Routing
> Protocols Command Reference the default value of the metric argument
> is 10, but the IOS doesn't seem to agree with that.
>
> R0(config-router)#do sh run | s ospf
> router ospf 10
> log-adjacency-changes
> network 10.0.0.0 0.0.0.255 area 0
> default-information originate always
> R0(config-router)#do sh ip ospf data ex
>
> OSPF Router with ID (100.100.100.100) (Process ID 10)
>
> Type-5 AS External Link States
>
> LS age: 8
> Options: (No TOS-capability, DC)
> LS Type: AS External Link
> Link State ID: 0.0.0.0 (External Network Number )
> Advertising Router: 100.100.100.100
> LS Seq Number: 80000006
> Checksum: 0x1003
> Length: 36
> Network Mask: /0
> Metric Type: 2 (Larger than any link state path)
> TOS: 0
> Metric: 1
> Forward Address: 0.0.0.0
> External Route Tag: 10
>
> Does anyone know why the metric is shown as 1 here?
>
> Thank you!
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:11 ARST