From: NET HE (he_net@hotmail.com)
Date: Sun Feb 15 2009 - 20:00:51 ARST
Below is what I have summarized.
-for redistributed routes, the advertised metric is as defined by
redistribution process
-for received routes from other RIP speakers, the advertised metric is
(received + 1), of cause by default following split horizon rule.
-summarization by cmd under the interface is earlier than distribution-list,
so distribution-list will work on summary routes generated by the interface
command
-summary route's metric = the minimum metric of component routes + 1 (by
command under the interface)Best Regards, Net (Xin) He > Date: Sat, 14 Feb
2009 11:27:33 -0800> Subject: RIP metric> From: ccie22@gmail.com> To:
ccielab@groupstudy.com> > Folks,> I have 4 lookbacks that i created on one
router. I> redistribute the loopbacks in the rip process with a metric of 3.
When> I go to the adjoinging router which is also running RIP, I see that> the
metric is still 3. Shouldn't the router redistributing the> loopbacks into RIP
increment the metric by 1 before forwarding the> updates to the adjoining
router?> > Any help would be appreciated?> Thanks> > > Blogs and organic
groups at http://www.ccie.net> >
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:11 ARST