From: Ramanpreet Singh (sikandar.raman@gmail.com)
Date: Sun Feb 15 2009 - 13:31:21 ARST
I agree with scott.. I was thinking about MTU issues but MTU is 1500 for
all the three router interfaces..
On Sun, Feb 15, 2009 at 9:27 AM, Scott Morris <
smorris@internetworkexpert.com> wrote:
> Timers won't make an adjacency to begin with. I'd look at MTU issues
> although that's not common on router-to-router unless you have manipulated
> something along the way!
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Ryan
> DeBerry
> Sent: Sunday, February 15, 2009 10:21 AM
> To: Ramanpreet Singh
> Cc: Cisco certification
> Subject: Re: OSPF v3- neighbors bouncing
>
> Sounds like your timers dont match.
>
> Show ip ospf int s0/0/0.346
>
>
> On Sun, Feb 15, 2009 at 10:13 AM, Ramanpreet Singh <
> sikandar.raman@gmail.com
> > wrote:
>
> > I have configured point to multipoint ipv6 frame-relay for OSPF v3
> between
> > R3, R4 and R6. I am unable to form "Full" state neighbor relationship.
> >
> > For some reason, neighbor relationship is bouncing between init and
> > Exstart.
> > As soon as it reaches full state, it bounces back to init. Kindly help.
> >
> > Here sre the configs.
> >
> >
> > *R6*
> > interface Serial0/0/0.346 multipoint
> > ip address 110.1.0.6 255.255.255.0
> > ip ospf network point-to-multipoint
> > ip ospf hello-interval 10
> > ipv6 address 2001:0:0:346::/64 eui-64
> > ipv6 ospf network point-to-multipoint
> > ipv6 ospf hello-interval 10
> > ipv6 ospf 1 area 0
> > frame-relay map ipv6 FE80::216:9DFF:FE43:FDE0 604 broadcast
> > frame-relay map ipv6 2001::346:215:C6FF:FEF2:64D0 603
> > frame-relay map ip 110.1.0.3 603 broadcast
> > frame-relay map ip 110.1.0.4 604 broadcast
> > frame-relay map ipv6 2001::346:216:9DFF:FE43:FDE0 604
> > frame-relay map ipv6 FE80::215:C6FF:FEF2:64D0 603 broadcast
> >
> > *R3*
> > interface Serial0/0/0
> > ip address 110.1.0.3 255.255.255.0
> > encapsulation frame-relay
> > ip ospf network point-to-point
> > ipv6 address 2001:0:0:346::/64 eui-64
> > ipv6 ospf network point-to-point
> > ipv6 ospf 1 area 0
> > frame-relay map ipv6 FE80::216:9DFF:FE43:FDE0 304 broadcast
> > frame-relay map ipv6 2001::346:216:9DFF:FE43:64A0 306
> > frame-relay map ip 110.1.0.6 306 broadcast
> > frame-relay map ipv6 FE80::216:9DFF:FE43:64A0 306 broadcast
> > frame-relay map ipv6 2001::346:216:9DFF:FE43:FDE0 304
> > no frame-relay inverse-arp
> > frame-relay lmi-type ansi
> >
> > *R4*
> > !
> > interface Serial0/0/0
> > ip address 110.1.0.4 255.255.255.0
> > encapsulation frame-relay
> > ip ospf network point-to-point
> > ipv6 address 2001:0:0:346::/64 eui-64
> > ipv6 ospf network point-to-point
> > ipv6 ospf 1 area 0
> > frame-relay map ipv6 2001::346:216:9DFF:FE43:64A0 406
> > frame-relay map ipv6 2001::346:215:C6FF:FEF2:64D0 403
> > frame-relay map ip 110.1.0.6 406 broadcast
> > frame-relay map ipv6 FE80::216:9DFF:FE43:64A0 406 broadcast
> > frame-relay map ipv6 FE80::215:C6FF:FEF2:64D0 403 broadcast
> > no frame-relay inverse-arp
> > frame-relay lmi-type ansi
> > end
> >
> > **
> > **
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:11 ARST