From: Gavin Lawson (Gavin.Lawson@kjv.com.au)
Date: Tue Feb 10 2009 - 23:01:06 ARST
You need to buy or make a T1/E1 Cross over cable.
Then this document will help with the config.
Cisco's document ID: 9333
"Master and Slave Relationships on a T1 Back-to-Back Connection"
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_configuration_e
xample09186a00800a6b82.shtml
GL
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sharma, Praveen
Sent: Wednesday, 11 February 2009 9:49 AM
To: Cisco certification
Subject: VWIC2-2MFT-T1/E1
Hi GS,
Need help in connecting two routers directly using VWIC2-2MFT-T1/E1
card.
Thanks
Praveen
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST