From: Scott Morris (smorris@internetworkexpert.com)
Date: Tue Feb 10 2009 - 13:40:19 ARST
If an L2 device, you don't. If an L3 device, ping.
Otherwise, my vote is Gremlins.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jersey Guy
Sent: Tuesday, February 10, 2009 9:46 AM
To: Cisco certification
Subject: what's on the other side of a GigE port?
Ya I know, this is Networking-101, shame on me....but I can use some help
here....
Assuming there's no CDP running on the box, how do I find out the IP address
of the devices that are connected to GigE ports on my WS-C4948?
*GigabitEthernet1/23 unassigned YES unset up
up
GigabitEthernet1/24 unassigned YES unset up
up
*Assume these are dedicated switch ports with only one device on the other
end. *
*thanks, JG*
*
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST