From: ALL From_NJ (all.from.nj@gmail.com)
Date: Mon Feb 09 2009 - 15:00:15 ARST
Hey team,
Here is the BGP config guide reference (watch the ugly word wrap)
http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_bgp2.html#wp1014625
Without knowing more details about what you have going on, it is not easy to
tell what the issue is. Thanks Daniel for the link!
Kindest regards,
Andrew Lee Lissitz
On Mon, Feb 9, 2009 at 11:45 AM, Daniel Kutchin <daniel@kutchin.com> wrote:
> Check the Syntax of your ACL; it's slightly different for BGP than for IGPs
>
>
>
> http://blog.internetworkexpert.com/2008/01/04/using-extended-access-lists-in
> -a-distribute-list/<http://blog.internetworkexpert.com/2008/01/04/using-extended-access-lists-in%0A-a-distribute-list/>
>
>
>
> -
>
> Daniel
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Mohamed Zeavudeen
> Sent: Montag, 9. Februar 2009 17:10
> To: ccielab@groupstudy.com
> Subject: BGP Distribution list
>
> I am learning the routes from different bgp peers and would like to filter
> it from entering my routing table.
>
> I applied the below command at the bgp process to filter from all the bgp
> peers instead of applying at the each neighbor command.
>
> distribute-list 10 in
>
> It doesn't seems to be working, is it normal behavior or any reasons behind
> it.
>
> Kind regards,
> Z
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Andrew Lee Lissitz all.from.nj@gmail.comBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST