From: olugbenga lasisi (logpoet@gmail.com)
Date: Mon Feb 09 2009 - 03:43:25 ARST
Hi Experts,
I have been trying to set up a home Lab for my R&S exam. I have problem with
the access server setup. I am using a 2509 as an access server. I have the
router configured to do reverse telnet. The reverse telnet works but i am
unable to return to the access server terminal when i press ctrl + shift + x
+ 6. I am not sure if there is anything i need to do to enable the router to
respond to these keyboard strokes.
The config on the access server is given below
hostname AccessServer
!
!
!
!
ip subnet-zero
ip host R1 2001 1.1.1.1
ip host R3 2003 1.1.1.1
ip host R2 2002 1.1.1.1
ip host R4 2004 1.1.1.1
ip host R5 2005 1.1.1.1
ip host Frame 2006 1.1.1.1
ip host SwitchB 2007 1.1.1.1
ip host SwitchA 2008 1.1.1.1
!
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
no ip classless
no ip http server
!
line con 0
exec-timeout 0 0
logging synchronous
line 1 9
transport input telnet
end
Also worthy to note are the information below;
My serial interface is via a USB port.
I run a windows vista OS as such i had to tweak the windows system directory
to be able to use to hyperterminal program
I will appreciate if i could get a get out jail card from any one on this
forum for this problem.
Gbenga
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST