From: Sidda6 (sidda6@gmail.com)
Date: Sun Feb 08 2009 - 11:49:13 ARST
Hi GS,
I have topology like as shown below
R6#
router bgp 6
no synchronization
bgp router-id 3.3.6.6
bgp log-neighbor-changes
bgp confederation identifier 3
bgp confederation peers 2
neighbor 3.3.2.2 remote-as 2
neighbor 3.3.2.2 ebgp-multihop 4
neighbor 3.3.2.2 update-source Loopback0
neighbor 111.111.111.111 remote-as 11
no auto-summary
R1#
router bgp 11
no synchronization
bgp router-id 11.11.11.11
bgp log-neighbor-changes
neighbor 111.111.111.116 remote-as 6
no auto-summary
I am just trying to establish peering between R6 and R1. It is poping
up error from both R1 and R6 as " %BGP-3-NOTIFICATION: sent to
neighbor x.x.x.x (peer in wrong AS) 2 bytes".
What is wrong with my config.? Is there anything thing should I add to
establish perfect peering between these. Kindly advise.
Regards,
Sidda
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST