From: Mahesh Shivaswamy (maheshs.cisco@gmail.com)
Date: Sat Jan 31 2009 - 20:49:14 ARST
Thanks Ronnie, it worked when I change the dist in OSPF & able to avoid the
loop.
Why can't the external EIGRP routes distance be changed ???
-Mahesh
On Sat, Jan 31, 2009 at 4:32 PM, Ronnie Angello <ronnie.angello@gmail.com>wrote:
> You can't use the distance command to change the admin distance of
> external EIGRP routes. Use the distance eigrp command to change the
> distance for external routes or change the admin distance of your OSPF
> routes to 171.
>
> On Sat, Jan 31, 2009 at 4:41 PM, Mahesh Shivaswamy
> <maheshs.cisco@gmail.com> wrote:
> > Hi,
> >
> > I have R2 & R3 runing EIGRP & OSPF and are mutually redistributing.
> >
> > The networks 132.1.6.0, 132.1.5.0 & 192.10.1.0 are in EIGRP as external
> > routes with AD 170, I am trying to set the AD to 109 with the following
> > configs
> >
> > access-list 5 permit 132.1.6.0 0.0.0.255
> > access-list 5 permit 132.1.5.0 0.0.0.255
> > access-list 5 permit 192.10.1.0 0.0.0.255
> >
> > router eigrp 10
> > distance 109 0.0.0.0 255.255.255.255 5
> >
> > I do not see the distance being set to 109
> >
> > R2#sh ip route 132.1.6.0
> > Routing entry for 132.1.6.0/24
> > Known via "eigrp 10", distance 170, metric 2560002816, type external
> > Redistributing via ospf 1, eigrp 10
> > Advertised by ospf 1 subnets
> > Last update from 132.1.26.6 on FastEthernet0/0, 00:18:00 ago
> > Routing Descriptor Blocks:
> > * 132.1.26.6, from 132.1.26.6, 00:18:00 ago, via FastEthernet0/0
> > Route metric is 2560002816, traffic share count is 1
> > Total delay is 110 microseconds, minimum bandwidth is 1 Kbit
> > Reliability 1/255, minimum MTU 1 bytes
> > Loading 1/255, Hops 1
> >
> > R2#
> > R2#sh ip route 132.1.5.0
> > Routing entry for 132.1.5.0/24
> > Known via "ospf 1", distance 110, metric 20, type extern 2, forward
> metric
> > 64
> > Redistributing via eigrp 10
> > Advertised by eigrp 10 metric 1 1 1 1 1
> > Last update from 132.1.0.3 on Serial0/0, 00:17:22 ago
> > Routing Descriptor Blocks:
> > * 132.1.0.3, from 150.1.3.3, 00:17:22 ago, via Serial0/0
> > Route metric is 20, traffic share count is 1
> >
> > R2#
> > R2#sh ip route 192.10.1.0
> > Routing entry for 192.10.1.0/24
> > Known via "ospf 1", distance 110, metric 20, type extern 2, forward
> metric
> > 64
> > Redistributing via eigrp 10
> > Advertised by eigrp 10 metric 1 1 1 1 1
> > Last update from 132.1.0.3 on Serial0/0, 00:17:32 ago
> > Routing Descriptor Blocks:
> > * 132.1.0.3, from 150.1.3.3, 00:17:32 ago, via Serial0/0
> > Route metric is 20, traffic share count is 1
> >
> > What am I missing here ??
> >
> > rgds
> > Mahesh
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
> --
> Ronald Angello
> CCIE #17846
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:41 ARST