From: karim jamali (karim.jamali@gmail.com)
Date: Fri Jan 30 2009 - 17:16:01 ARST
Hello experts,
I have a couple of questions to pose.I would really be thankful for any
guidance and help from your side.
1) Concerning multicast:is there any difference between using ip igmp
access-group/ip multicast boundary?If yes could you please explain to me?
2) I have a scenario having SW2,R5,R4,R6
R5 AND R4 are configured to be *msdp peers* having the same rp-address
SW2 and R6 are configured to use this RP address( *SW2 will associate to R5*
,*R6 will associate to R4*). Having the msdp peering relationship
configured between R4 and R5, aren't these two multicast domains
communicating together i.e. is it not true that R5 and R4 will communicate
the information about clients and servers between them? is there an
additional requirement?
3) *IPV6 redistribution*: When doing redistribution in IPV6 I noticed that
option include-connected. Well as far as i know when RIP is redistributed
into OSPF the following happens
a) RIP Routes in the routing table will be redistributed
b) Interfaces running RIP which show as connected will also be redistributed
Is there any difference related to IPV6?
Thank You for your time & effort:)
-- KJBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST