From: mreiks (marakalas.molefe@gmail.com)
Date: Thu Jan 29 2009 - 11:34:26 ARST
Try using scalable MPLS VPN hub and spoke architecture.
http://www-search.cisco.com/en/US/docs/ios/12_3/rewrite/mpls/mpbkhalf.pdf
On Thu, Jan 29, 2009 at 10:47 AM, sanju shastri <cuteboysanju@gmail.com>wrote:
> Hello Experts,
>
> I got struck in a query.
>
> I am working in MPLS VPN Scenario and I need to give clients Hub and spoke
> connection with no spoke to spoke communication which can be done via using
> different RTs for Hub and Spoke sites.
>
> Now the issue is that spokes have default route towards hub and so the
> traffic will hit Spoke PE , now as we are only importing the HUB RT so
> spoke
> routes are not there , But in case multiple Ce are there on a PE and Static
> routing is used between CE to PE , When traffic hits the Spoke PE , it
> finds
> a route of other spoke and Two CEs can still communicate without Hub.
>
> The solution that come into my mind are
> 1) Use access list on either CE and PE
> 2) Use different VRF's in case multiple CEs are terminating at PE for each
> CE.
>
> Any other options that you can think of...
>
>
>
>
> Thanks :)
> Sanju
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST