rp-announce-filter

From: CCIE To Be (ccie.tobe81@gmail.com)
Date: Thu Jan 29 2009 - 07:35:54 ARST

• Next message: CCIE To Be: "PIM Version 2"
• Previous message: ehiwe peter: "multiserver architecture on gns3"
• Next in thread: Jared Scrivener: "RE: rp-announce-filter"
• Maybe reply: Jared Scrivener: "RE: rp-announce-filter"
• Maybe reply: CCIE To Be: "Re: rp-announce-filter"
• Maybe reply: Jared Scrivener: "RE: rp-announce-filter"
• Maybe reply: NET HE: "RE: rp-announce-filter"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi All,

My question is regarding filtering of groups for RP. We have following
options according to mode of RP advertisment,

1) ip pim rp-address 1.1.1.1 [ *access-list* ] ( On RP )

2) ip pim rp-candidate loopback0 *group-list yy* ( On RP )
**
3) ip pim send-rp-announce loopback0 *group-list yy* ( On RP )
    ip pim rp-announce-filter *group-list yy* *rp-list xx * ( On Mapping
Agent )

In option 3 , rp-announce-filter is mandatory on MA ? I observerd that
without using this we can get the same result untill and unless it is
specific requirement in the task that we should filter on RP and MA as well.

Need you comments on this.

HTH,

Raul

Blogs and organic groups at http://www.ccie.net

• Next message: CCIE To Be: "PIM Version 2"
• Previous message: ehiwe peter: "multiserver architecture on gns3"
• Next in thread: Jared Scrivener: "RE: rp-announce-filter"
• Maybe reply: Jared Scrivener: "RE: rp-announce-filter"
• Maybe reply: CCIE To Be: "Re: rp-announce-filter"
• Maybe reply: Jared Scrivener: "RE: rp-announce-filter"
• Maybe reply: NET HE: "RE: rp-announce-filter"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST