From: Shine Dodo (shinejoseph@dodo.com.au)
Date: Sat Jan 24 2009 - 07:41:20 ARST
Hi,
Please see the link below:
http://www.cisco.com/en/US/docs/ios/12_2/qos/command/reference/qrfcmd1.html#
wp1017391
precedence 3 corresponds to 0000 1000 and
precedence 6 corresponds to 0100 0000
For precedences 3 & 6, the binary value is 0100 1000 which translates to
48(0100=4 & 1000=8)
That means the access-list is as follows:
Access-list rate-limit 9 mask 48
HTH,
Shine
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
mreiks
Sent: Saturday, 24 January 2009 2:50 PM
To: Cisco certification; Cisco certification
Subject: Access-list rate-limit mask
Hi guys
I want to create an access-list with only one line that matches IP
Precedence 3 and 6. I know my option is limited to using the ACL rate-limit
mask with a HEX value.
3 = 0000 0011
6 = 0000 0110
Is the answer to this
= 0000 0111 = 6F ?
access-list rate-limit 9 mask 6F
Your assistance will be appreciated.
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:39 ARST