From: Bogdan Sass (bogdan.sass@catc.ro)
Date: Fri Jan 23 2009 - 20:24:48 ARST
Pavel Bykov wrote:
> Bogdan,
> similar, but not exactly same, can be generated using following:
> (config)#
> archive
> log config
> logging enable
> logging size 200
> notify syslog
> hidekeys
> *
> And then commands will look like that:
>
> *Jan 23 21:25:39.086: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged
> command:interface lo 10
> *Jan 23 21:25:45.974: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged
> command:ip address 10.0.0.1 255.255.255.255
>
> But instead of "parser" facility you have priviledge level...
>
> *
* *That is exactly the answer I gave him :) - but as you can see, the
output I got from him is quite different from the "usual" archive logs...
I would also like to see the running config on that router, but I'm
not sure that is possible. Will try to obtain it, though. :)
Thank you very much for all your help so far!
-- Bogdan Sass CCAI,CCSP,JNCIA-ER,CCIE #22221 (RS) Information Systems Security Professional "Curiosity was framed - ignorance killed the cat"Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:39 ARST