From: Dale Shaw (dale.shaw@gmail.com)
Date: Wed Jan 21 2009 - 05:27:45 ARST
Hi,
On Wed, Jan 21, 2009 at 6:15 PM, Nitro Drops <nitrodrops@hotmail.com> wrote:
> Just finished reading thru the DOCCD on WCCP.
>
> Say the router has already enable WCCP.
>
> This router has 2 fastethernets, F0/1 & F0/0
>
> If the "Content Engine" is located in the subnet of F0/0,
>
> do i use
> F0/0 = redirect in
> F0/1 = redirect out
Neither :-)
If your clients are on Fa0/1 and the content engine/proxy server/WAN
accelerator/whatever is on Fa0/0, you'd either 'redirect in' on Fa0/1,
or you'd 'redirect out' on the interface the traffic would normally
egress on its way to the actual destination. You'd also need a
'redirect exclude in' on Fa0/0.
If that makes no sense, maybe send a follow-up e-mail depicting where
the clients and actual destination are.
cheers,
Dale
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:39 ARST