From: Ravi Singh (way2ccie@googlemail.com)
Date: Sun Jan 18 2009 - 00:19:12 ARST
Make sure the source IP you are using to connect to the ACS server is the
same as defined in the ACS. You can check the ACS logs as well to see why
the User is being rejected.
Ravi
On Sun, Jan 18, 2009 at 1:06 AM, Jordan <zdh1207@gmail.com> wrote:
> Hi,groups,
> I had a router and a ACS server. I had configured "tacacs-server host
> x.x.x.x" and "tacacs-server key xxx" commands on the router. I had
> add client and user on the ACS server accordingly. I can ping from the
> router to the ACS. When I used "test aaa group tacacs+ username
> password new-code" commands on the router, it came out as:
> "Trying to authenticate with Servergroup tacacs+
> R2#User rejected".
>
> what's the problem?
>
> anyone help would be appreciated.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:38 ARST