Re: MST configuration

From: Jason Madsen (madsen.jason@gmail.com)
Date: Thu Jan 15 2009 - 01:28:41 ARST

• Next message: Thomas Renzy (threnzy): "RE: DMVPN question"
• Previous message: Jason Madsen: "Re: MST configuration"
• Maybe in reply to: Raghav Bhargava: "MST configuration"
• Next in thread: Jonathan Greenwood II: "Re: MST configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

...forgot the key word there. Configure spanning-tree port-priority on the
"upstream" device.

Jason

On Wed, Jan 14, 2009 at 8:28 PM, Jason Madsen <madsen.jason@gmail.com>wrote:

> configure spanning-tree (MST or any other...) on the "upstream" device.
>
> Jason
>
>
> On Wed, Jan 14, 2009 at 7:39 PM, Raghav Bhargava <
> raghavbhargava12@gmail.com> wrote:
>
>> Hi Experts,
>>
>> When configuring port priority for specific instances in MST between 2
>> Switches which have a dot1q trunk between them .
>> Do we need to configure the command spanning-tree mst 1 port-priority
>> x on both the switches or just 1 will work??
>>
>> --
>> Warm Regards
>> Raghav
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net

• Next message: Thomas Renzy (threnzy): "RE: DMVPN question"
• Previous message: Jason Madsen: "Re: MST configuration"
• Maybe in reply to: Raghav Bhargava: "MST configuration"
• Next in thread: Jonathan Greenwood II: "Re: MST configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:38 ARST