From: Pavel Bykov (slidersv@gmail.com)
Date: Mon Jan 12 2009 - 11:30:58 ARST
Since it's PtM, you'll have a hard time, but as Sadiq has pointed out PPPoFR
might be the solution, if it is stretched far enough.
You are authenticating a link, so you need to change topology from
triangular to two PtP links.
Simple PPPoFR will terminate both DLCIs on the same Template, so you'll have
cloned Virtual-Accesses and therefore same settings.
You'd need to separate them into two different ones.
I.E. Something to the following tune:
frame-relay interface-dlci 101 ppp virtual-template 1
frame-relay interface-dlci 102 ppp virtual-template 2
int virtual-templ 1
ip add unnumbered lo 0
ip ospf authentication
int virtual-templ 2
ip add unnumbered lo 0
ip ospf authentication null
On Mon, Jan 12, 2009 at 1:55 PM, Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
> PPPoFR?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Pavel Bykov ---------------- Don't forget to help stopping the braindumps, use of which reduces value of your certifications. Sign the petition at http://www.stopbraindumps.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:37 ARST