From: Darby Weaver (ccie.weaver@gmail.com)
Date: Mon Jan 12 2009 - 03:14:08 ARST
Is f0/7 the only port in vlan 567?
On Sun, Jan 11, 2009 at 7:28 PM, Jason Morris <mcnever@gmail.com> wrote:
> ok, i'm having some issues with the 'ingress' portion of the monitor
> it would appear. I've done this 100 times in real life and now i
> can't seem to get it to work in a lab. am i missing something or does
> ingress work differently on the 3560 or what? thoughts?
>
> 150.100.220.7 is connected to f0/7 of this switch.
>
> see the output below
>
> Cat-2(config)#do sho run | i monitor
> monitor session 1 source interface Fa0/15
> monitor session 1 destination interface Fa0/7 ingress untagged vlan 567
> Cat-2(config)#do sho run int f0/7
> Building configuration...
>
> Current configuration : 85 bytes
> !
> interface FastEthernet0/7
> switchport access vlan 567
> switchport mode access
> end
>
> Cat-2(config)#do sho run int vlan 567
> Building configuration...
>
> Current configuration : 68 bytes
> !
> interface Vlan567
> ip address 150.100.220.12 255.255.255.240
> end
>
> Cat-2(config)#do ping 150.100.220.7 repeat 15
>
> Type escape sequence to abort.
> Sending 15, 100-byte ICMP Echos to 150.100.220.7, timeout is 2 seconds:
> ...............
> Success rate is 0 percent (0/15)
>
> Cat-2(config)#no monitor session 1 destination int f0/7
> Cat-2(config)#do ping 150.100.220.7 repeat 15
>
> Type escape sequence to abort.
> Sending 15, 100-byte ICMP Echos to 150.100.220.7, timeout is 2 seconds:
> ..........!!!!!
> Success rate is 33 percent (5/15), round-trip min/avg/max = 1/2/8 ms
> Cat-2(config)#
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:37 ARST