Re: RIP V2 over hub and spoke FR

From: Wouter Prins (wp@null0.nl)
Date: Thu Jan 08 2009 - 05:00:29 ARST

• Next message: backbone systems: "Switching Question...Security..."
• Previous message: Waterman, Roy: "RE: Passed on third attempt"
• Maybe in reply to: Sidda6: "RIP V2 over hub and spoke FR"
• Next in thread: Pavel Bykov: "Re: RIP V2 over hub and spoke FR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Sidda,

Check if the pvc's you are using are available? 'show frame-relay pvc'
Check your encapsulation failures? 'debug frame-relay packets'

Regards,
Wouter

2009/1/8 Sidda6 <sidda6@gmail.com>

> Can some one look into this.. 1)why I am unable to ping
> networks(interfaces)
> outside FR cloud? 2) Since I am disabling ip split-horizon, can I use main
> interface itself on R1 hub router
>
> I have 3 routers R1-R4-R5, R1 as hub and R4&R5 as spokes.
>
> on each router I have RIP config like this:
>
> router rip
> version 2
> network 10.0.0.0
> network <network on fastethernet 0/0 of router> ( as example for R5:
> network
> 5.0.0.0 )
>
> => configs are below..
>
> R1
> ==
>
> WAN interface
> ===============
> interface Serial0/0/0
> no ip address
> encapsulation frame-relay
> !
> interface Serial0/0/0.1 multipoint
> ip address 10.0.0.1 255.0.0.0
> no ip split-horizon
> frame-relay map ip 10.0.0.4 104 broadcast
> frame-relay map ip 10.0.0.5 105 broadcast
> no frame-relay inverse-arp
> !
>
>
> LAN interface
> =============
> interface FastEthernet0/0
> ip address 1.0.0.1 255.0.0.0
> duplex auto
> speed auto
> !
>
>
> R4
> ==
>
> WAN interface
> ===============
> interface Serial0/0/0
> ip address 10.0.0.4 255.0.0.0
> encapsulation frame-relay
> frame-relay map ip 10.0.0.1 401 broadcast
> frame-relay map ip 10.0.0.5 401
> no frame-relay inverse-arp
>
> LAN interface
> =============
> interface FastEthernet0/0
> ip address 4.0.0.4 255.0.0.0
> duplex auto
> speed auto
> !
>
> R5
> ===
> WAN interface
> ===============
> interface Serial0/0/0
> ip address 10.0.0.5 255.0.0.0
> encapsulation frame-relay
> frame-relay map ip 10.0.0.1 501 broadcast
> frame-relay map ip 10.0.0.4 501
> no frame-relay inverse-arp
> !
> LAN Interface
> =============
> interface FastEthernet0/0
> ip address 5.0.0.5 255.0.0.0
> duplex auto
> speed auto
> !
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net

• Next message: backbone systems: "Switching Question...Security..."
• Previous message: Waterman, Roy: "RE: Passed on third attempt"
• Maybe in reply to: Sidda6: "RIP V2 over hub and spoke FR"
• Next in thread: Pavel Bykov: "Re: RIP V2 over hub and spoke FR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:37 ARST