From: Syed Ali (testcricket@gmail.com)
Date: Mon Jan 05 2009 - 23:52:17 ARST
Thanks guys. I got the answer from Roy:
Hmm you have ipv6 bgp neighbors and you are using the sh ip bgp sum
command...which as far as Im aware applies to IPv4 neighbors.
Can you use the command: *sh bgp ipv6 sum* , and advise on the status of
the peering?
Regards
Roy
thanks again to all who replied
thanks
Syed
On Tue, Jan 6, 2009 at 4:50 AM, Tyson Scott <tscott@ipexpert.com> wrote:
> It means there is a capabilities mismatch between the peers. Check the
> capabilities on each side using the show bgp ipv6 unicast neighbors on each
> router and see if you can determine the mismatch.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S and Security
> Technical Instructor - IPexpert, Inc.
>
> Telephone: +1.810.326.1444
> Cell: +1.248.504.7309
> Fax: +1.810.454.0130
> Mailto: tscott@ipexpert.com
>
> Join our free online support and peer group communities:
> http://www.IPexpert.com/communities <http://www.ipexpert.com/communities>
>
> IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
> Demand
> and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE
> Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage
> Lab Certifications.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Syed
> Ali
> Sent: Monday, January 05, 2009 8:12 PM
> To: Cisco certification
> Subject: MP-BGP
>
> Hi All,
> Can someone explain as when I do *show ip bgp sum*, I get the *
> NoNeg* as below. What does this mean as I do see it as a valid neighbor
>
> FEC0:234::2 4 300 7 8 0 0 0 00:03:25 (NoNeg)
> thanks
> Syed
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:36 ARST