From: John Edom (jedom123@gmail.com)
Date: Sat Jan 03 2009 - 06:16:43 ARST
task may not ask for reachability to BB routes but we have to make sure
these routes in routing table that task allow to redistribute in our IGP.
One way i am thinking of is go to edge routers only and check route for
these networks
Regards
On Sat, Jan 3, 2009 at 12:04 PM, Roger RPF <rpf@bluemail.ch> wrote:
> Well, this TCL is only to check your IGP reachability (which was the
> original question).
>
> If it is needed by the task that also your BB routes must be reachable, you
> can also do some filtering with show commands in the sh ip route command
but
> maybe cut and paste columns with the Alt key is not so handy.
>
>
>
>
>
> *Von:* John Edom [mailto:jedom123@gmail.com]
> *Gesendet:* Samstag, 3. Januar 2009 08:24
> *An:* Roger RPF
> *Cc:* ramiz sardar; ccielab@groupstudy.com
> *Betreff:* Re: Lab - Best Method to Verfiy Reachibility
>
>
>
> Hi great trick....... Tell me how to verify external routes coming from BBs
> ?
>
> Regards
>
> On Wed, Dec 24, 2008 at 5:28 PM, Roger RPF <rpf@bluemail.ch> wrote:
>
> Well, I think this really depends on your topology and the task, maybe not
> all of your networks or BB LAN have to be reachable.
> Checking the Loopback is one thing but this does not ensure that you have
> correct reachability, only if you ping all of your addresses you can be
> sure.
>
> Making the TCL is pretty quick with some "tricks".
>
> 1. go to each router and do a sh ip int brief | e un
> -> this will exclude all interfaces without an IP address
>
> 2. then (on secure crt, which you will have in the lab), press the "Alt" -
> Key, (so you are in column mode) and now you can mark all these IP
> addresses
> out of the sh ip int brief command (always press the "Alt" key while
> marking) and put it in the notepad.
>
> You see, this goes very fast, try it out!
>
> regards
>
> Roger
>
> -----Urspr|ngliche Nachricht-----
> Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
> ramiz sardar
> Gesendet: Mittwoch, 24. Dezember 2008 14:09
> An: ccielab@groupstudy.com
> Betreff: Lab - Best Method to Verfiy Reachibility
>
>
> Hi Experts,
>
> After completion of IGP section, what is the best method to verify
> reachibility? Most of people use ping tclscript so if this is the
> recomendation then should we ping each and every interface or some of them?
> I
> think if we ping loopback interfaces of all devices and interfaces of that
> are
> connected with BBs, this is fine.
>
> kindly add your comments. Best Regards,Rameez
> _________________________________________________________________
> Invite your mail contacts to join your friends list with Windows Live
> Spaces.
> It's easy!
>
>
http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&
> m
> kt=en-us
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:36 ARST