From: Piotr M (pitt2k@gmail.com)
Date: Tue Dec 30 2008 - 12:34:31 ARST
Hi Experts,
I have 2 PE routers and 4 CE routers (2CE are connected to PE1 and 2CE
are connected to PE2). 2 CEs (connected to two different PEs)
represent one customer (VPN1) and another 2 CEs represent second
customer (VPN2). I have VPNv4 session between both PEs and
successfully exchange customer's routes.
I don't use LDP in my MPLS cloud, I only use RSVP to distribute labels
and MPLS TE for LSP. I created 2 tunnel interfaces on both PE routers
(because MPLS TE tunnles are unidirectional). One of those tunnels
uses dynamic path and second one uses explicit path. Tunnels are up
and everything goes thru tu0.
I want to route first customer traffic (VPN1) via Tunnel0 and second
customer traffic (VPN2) via Tunnel1. But, both tunnels are terminated
on the same DEST address which is far end PE's loopback (the same
where I terminate MPBGP session on).
Could someone advise how to do that? How do you do such things in a real world?
Thanks in advance.
PM
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:10 ARST