From: Muhabat Khan (muhabat@gmail.com)
Date: Mon Dec 29 2008 - 06:49:06 ARST
Hi GS,
when i change a vtp domain name then hash value on switch also changes....
is this normal behavior? BTW i am using dynamips NM-16ESW switch.
Please see below output.
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
sw2(config)#do sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 36
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : null
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x13 0x95 0x3A 0xE0 0xED 0x65 0x5E 0x18
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
sw2(config)#vtp
sw2(config)#vtp do
sw2(config)#vtp domain CCIE
Changing VTP domain name from null to CCIE
sw2(config)#do sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 36
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : CCIE
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xC1 0x76 0xED 0x05 0x05 0x70 0x10 0xC1
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:10 ARST