From: Scott Morris (smorris@internetworkexpert.com)
Date: Wed Dec 24 2008 - 16:44:48 ARST
Because it wasn't introduced until 12.4T! And that software isn't listed
for the lab!
Cheers,
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Bit
Gossip
Sent: Wednesday, December 24, 2008 9:29 AM
To: ccielab
Subject: EIRGP for IPv6 in 12.4 doc
Expert,
is there a reason why EIGRP is not in the command reference of 12.4
mainline?
Thanks,
bit.
Cisco IOS IPv6 Configuration Guide, Release 12.4
*
Start Here: Cisco IOS Software Release Specifics for IPv6 Features
*
Implementing IPv6 Addressing and Basic Connectivity
*
Implementing ADSL and Deploying Dial Access for IPv6
*
Implementing Multiprotocol BGP for IPv6
*
Implementing DHCP for IPv6
*
Implementing IPSec in IPv6 Security
*
Implementing IS-IS for IPv6
*
Implementing IPv6 for Network Management
*
Implementing Mobile IPv6
*
Implementing IPv6 over MPLS
*
Implementing IPv6 Multicast
*
Implementing NAT-PT for IPv6
*
Implementing NetFlow for IPv6
*
Implementing OSPF for IPv6
*
Implementing Policy-Based Routing for IPv6
*
Implementing QoS for IPv6
*
Implementing RIP for IPv6
*
Implementing Static Routes for IPv6
*
Implementing Traffic Filters and Firewalls for IPv6 Security
*
Implementing Tunneling for IPv6
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST