Re: Dot1x - need "aaa authen login" for vty in Lab

From: mahmoud genidy (ccie.mahmoud@gmail.com)
Date: Wed Dec 24 2008 - 09:50:44 ARST

• Next message: ramiz sardar: "Lab - Best Method to Verfiy Reachibility"
• Previous message: Wouter Prins: "Re: voice vlan and qos map cos-dscp"
• Maybe in reply to: John Edom: "Dot1x - need "aaa authen login" for vty in Lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

What about using:

aaa authentication login VTY-LINES line

line vty 0 15
login authentication VTY-LINES

Mahmoud.

On Wed, Dec 24, 2008 at 8:27 PM, John Edom <jedom123@gmail.com> wrote:

> Hi,
>
> while configuring dot1x we add "aaa new-model" that enable authentication
> on
> vty lines also. So my question is in lab exam we need to configure aaa
> authen login with none and configure on vty lines. If yes then there are
> two
> ways; first is configure "aaa authen login no-auth none" and then configure
> on vty and console using "login authen no-auth".
> second way is configure "aaa authen login default none" so which one is
> best
> in lab exam?
>
> Regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net

• Next message: ramiz sardar: "Lab - Best Method to Verfiy Reachibility"
• Previous message: Wouter Prins: "Re: voice vlan and qos map cos-dscp"
• Maybe in reply to: John Edom: "Dot1x - need "aaa authen login" for vty in Lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST