From: John Edom (jedom123@gmail.com)
Date: Wed Dec 24 2008 - 07:57:15 ARST
but for this i configured "aaa new-model" that enable authentication on vty
lines so default behavior of vty changed. Please correct me if i am wrong.
Regards
On Wed, Dec 24, 2008 at 1:51 PM, Robert Steeneken <r.steeneken@gmail.com>wrote:
> For dot1x you use a separate aaa line ''aaa authentication dot1x'' so thats
> not used for vty etc.
>
> On Wed, Dec 24, 2008 at 10:27 AM, John Edom <jedom123@gmail.com> wrote:
>
>> Hi,
>>
>> while configuring dot1x we add "aaa new-model" that enable authentication
>> on
>> vty lines also. So my question is in lab exam we need to configure aaa
>> authen login with none and configure on vty lines. If yes then there are
>> two
>> ways; first is configure "aaa authen login no-auth none" and then
>> configure
>> on vty and console using "login authen no-auth".
>> second way is configure "aaa authen login default none" so which one is
>> best
>> in lab exam?
>>
>> Regards
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST