From: omar parihuana (omar.parihuana@gmail.com)
Date: Tue Dec 23 2008 - 19:20:38 ARST
Hi,
I faced the same problem, at this moment I don't remember which is the
exactly path from SW4 (F1/12) to R5 in Lab 1, but I remember that I had two
possibilities via SW2 and via SW1, just for example I suppose via SW2, then
when I checked the MAC address table in SW4 I noticed that R5 MAC was
learned via SW1 when should be learned via SW2. So I removed the VLAN "X"
(R5 VLAN) int SW1 and SW4 trunk after all worked fine!
Rgds.
On Tue, Dec 23, 2008 at 5:06 AM, <lovnish.sharma@bt.com> wrote:
> Hi,
>
> I am facing one issue while working on IEWB RS DYN v4.1 Volume 2 Lab 1 Task
> 1.4. Its regarding Layer-2/Layer-3 connectivity.
>
> When we need to ping SW4 interface Fa1/12 - IP 183.1.105.10 (VLAN 105) from
> R5.
>
> It doesnot PING however I have checked the trunk port allowed VLANs. All
> seems to be fine but still not able to PING.
>
> Don't know how to come out of this issue. I have tried almost everything
> but not getting solution. I have checked the configuration & it is similar
> to Lab solution workbook.
>
> Have you faced this kind of issue while working through dynamips. Please
> could you advice if something extra I need to configure here to acheive this
> solution.
>
> Any help is highly appreciated.
>
> Thank mate
>
> Lovnish
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Omar E.P.T ----------------- Certified Networking Professionals make better Connections!Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST