From: Muhabat Khan (muhabat@gmail.com)
Date: Tue Dec 23 2008 - 15:08:07 ARST
first two can be done
Cannot configure VLANs from config mode (only vlan database)
* Cannot change VTP Mode
on newer ios these are supported .... vtp mod can be changed on older
systems also.
HTH
On Tue, Dec 23, 2008 at 7:54 PM, Bogdan Sass <bogdan.sass@catc.ro> wrote:
>
> Jonny,
>>>
>>> Thanks for your reply.
>>>
>>> Are these typical issues with dynamips/Dynagen listed somewhere.
>>>
>>>
>> Issues with NM-16ESW:
> * Cannot configure VLANs from config mode (only vlan database)
> * Cannot change VTP Mode
> * Cannot do ISL trunking
> * Cannot enable bpdu-guard on interfaces
> * Cannot do private VLANs
> * Cannot do PAgP / LACP
> * Cannot set switch ports to nonegotiate
> * Cannot change SDM (Switch Database Templates) ).
>
> I don't remember exactly where I found them (somewhere on the dynamips
> forums, as far as I remember :) ).
>
> Also, from what I remember, NM-16ESW cannot do .1q tunnelling. (correct
> me if I'm wrong on this one)
>
> Also, another problem I had with dynamips was the one discussed recently
> on the list - layer 3 ports on a NM-16ESW not coming up on the first try.
>
> While this might seem like a long list, don't let it discourage you from
> using dynamips! I did about 90% of my lab preparation on dynamips, and it
> _definitely_ is a very good solution for those of us not affording a full
> equipment rack (or hundreds of hours of lab rentals).
>
> --
> Bogdan Sass
> CCNP,CCSP,JNCIA-ER,CCIE #22221 (RS)
> Information Systems Security Professional
> "Curiosity was framed - ignorance killed the cat"
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST