Re: Load Balancing between Serial ports

From: Shawn Zandi (szmetal@gmail.com)
Date: Thu Dec 18 2008 - 08:15:54 ARST

• Next message: Felix Nkansah: "Re: BOOTCAMP IN NIGERIA"
• Previous message: ENVULADU TSAKU: "BOOTCAMP IN NIGERIA"
• Maybe in reply to: Hooman Parta: "Load Balancing between Serial ports"
• Next in thread: Andrew Larkins: "RE: Load Balancing between Serial ports"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hooman,
CEF can do it with your same AD static routes, if traffic is between same
pair of src/dst, configure it per packet (ip load-sharing per-packet)
http://www.cisco.com/en/US/docs/ios/12_0/switch/configuration/guide/xccefc.html

there was a limitation for number of CEF entires, cant remember now (based
on nexthop) ... if bandwidth is different between links I would go for
bandwidth-proportinal loadbalancing with bgp dmzlink-bw

-- 
Sincerely,
Shawn Zandi
Routing, Switching & Security Consultant - CCIE
Dubai Internet City - Building 13
web: http://www.shafagh.com
email: shafagh@shafagh.com
On Thu, Dec 18, 2008 at 12:50 PM, Shaughn Smith <
Shaughn.Smith@za.verizonbusiness.com> wrote:
> After I typed my e-mail I thought about MLPPP
>
> Would be the "better" way to go, but like you say, depends on the topology
Blogs and organic groups at http://www.ccie.net

• Next message: Felix Nkansah: "Re: BOOTCAMP IN NIGERIA"
• Previous message: ENVULADU TSAKU: "BOOTCAMP IN NIGERIA"
• Maybe in reply to: Hooman Parta: "Load Balancing between Serial ports"
• Next in thread: Andrew Larkins: "RE: Load Balancing between Serial ports"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST