Re: Class based shaping Query

From: Narbik Kocharians (narbikk@gmail.com)
Date: Tue Dec 16 2008 - 13:37:29 ARST

I don't know where you read that, but chuck the book away.

On Tue, Dec 16, 2008 at 7:16 AM, Suryakant P <suryakant.pandian@gmail.com>wrote:

> Hi All,
>
> I read in some of the documentation ,that it is not possible to configure
> CB
> shaping on per DLCI basis when the Frame-Relay interface is multipoint
> subinterface with more than one DLCI.You can only apply CB shaping on the
> sub-interface and cumulatively shape traffic for all DLCI's on the
> sub-interface.
>
> You will have to use FRTS in this scenario if you need per DLCI shaping.
>
> But when I tried to lab it up,I was able to configure per DLCI CB shaping
> with FR multipoint interface.Could you please confirm if there are any
> latest changes in support of this feature.
>
> Here are the configurations....
>
> *interface Serial0/0/0
> no ip address
> encapsulation frame-relay
> clock rate 2000000
> !
> interface Serial0/0/0.125 multipoint
> ip address 155.1.155.2 255.255.255.0
> frame-relay interface-dlci 201
> class test1
> frame-relay interface-dlci 202
> class test2*
>
> *map-class frame-relay test1
> service-policy output shape
> !
> map-class frame-relay test2
> service-policy output shape*
>
> *policy-map shape
> class class-default
> shape average 128000*
>
> *2811-R2#show policy-map int se0/0/0.125
> Serial0/0/0.125: DLCI 201 -*
> * Service-policy output: shape*
> * Class-map: class-default (match-any)
> 17 packets, 578 bytes
> 5 minute offered rate 0 bps, drop rate 0 bps
> Match: any
> Traffic Shaping
> Target/Average Byte Sustain Excess Interval Increment
> Rate Limit bits/int bits/int (ms) (bytes)
> 128000/128000 1984 7936 7936 62 992 *
> * Adapt Queue Packets Bytes Packets Bytes Shaping
> Active Depth Delayed Delayed Active
> - 0 17 578 0 0 no
> Serial0/0/0.125: DLCI 202 -*
> * Service-policy output: shape*
> * Class-map: class-default (match-any)
> 0 packets, 0 bytes
> 5 minute offered rate 0 bps, drop rate 0 bps
> Match: any
> Traffic Shaping
> Target/Average Byte Sustain Excess Interval Increment
> Rate Limit bits/int bits/int (ms) (bytes)
> 128000/128000 1984 7936 7936 62 992 *
> * Adapt Queue Packets Bytes Packets Bytes Shaping
> Active Depth Delayed Delayed Active
> - 0 0 0 0 0 no
> 2811-R2#*
> *
> *
> Thanks
> With regards
> Suryakant
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
www.Net-Workbooks.com
Sr. Technical Instructor

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:08 ARST