From: Darby Weaver (ccie.weaver@gmail.com)
Date: Tue Dec 09 2008 - 21:22:15 ARST
Yep... That's what I kept saying... to myself.
Doesn't work like that.
Consider this if you use the <br> keyword because you didn't take the time
to be the expert with Frame, and that's the only truth there is to the
matter. Convenience will not buy you points. Um... Trust me. I promise.
Then...
What happens later? Are other requirements using broadcast or unicast?
Why? Why not? Are you sure?
How many point did you really lose? 2, 3, 10, 20?
Hey it's your $1400.00 lunch, enjoy it any way you want.
Better not to go in the lab and expect that it is going to be with or
without the <br> keyword.
Some will call this an asumption on your part.
Proctors may take this as an assumption this type of candidate needs more
time to clear up these assumptions before winning the digits.
On Tue, Dec 9, 2008 at 5:50 PM, <huan@huanlan.com> wrote:
> Hi Narbik,
>
> My reasons for adding "broadcast", unless the requirement states
> otherwise are:
>
> - convenient,
> - error prone,
> - time-saving.
>
> This are particularly important as far as CCIE lab is concerned.
>
> When configuring WAN FR PVC, I would NOT have to pay much attention to the
> requirements of the routing, and multicast, or even some miscenlinous topic
> such as NTP which use broadcast or multicast.
>
> I always configure "bp", as alias for "ping 255.255.255.255 timeout 1
> repeat
> 1". When configuring L2 (Switching, FR, or P2P Serial), I only need to
> issue
> "bp" and count responses, to see if I have full reachibility, instead of
> having to type actual IP addresses.
>
> This approach worked perfect for me!
>
> Regards,
>
> Huan
>
>
> --- On Wed, 12/10/08, Narbik Kocharians <narbikk@gmail.com> wrote:
>
>
>
> If your OSPF network is non-broadcast type, then your routing protocol will
> send hello and update via unicast, and will simply not send updates via
> broadcast. It will operate the same way as if you configure the map without
> the keyword broadcast. Having that broadcast keyword does not force the
> router to generate rudundant broadcast! Nothing different!
>
> Then why use it????????????????????
>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:08 ARST