From: Paul Adams (ccie.paul@gmail.com)
Date: Sat Dec 06 2008 - 18:27:17 ARST
Hi,
IOS version 12.4
can you add more lights to it ; its not clear to me what are you trying to
express.
On Sat, Dec 6, 2008 at 11:24 PM, Marko Milivojevic <markom@markom.info>wrote:
> Strictly speaking, it depends on the IOS version. However, I would not
> consider your provided answer as correct.
>
> On Sat, Dec 6, 2008 at 20:19, Paul Adams <ccie.paul@gmail.com> wrote:
> > Hi,
> >
> > Is it possible to assign Ip address on major interface and sub-interface,
> [
> > i.e assign ip for major and sub-interface for the same Interface ]
> > If so ; then is the answer correct as per question
> >
> > Question :- Create Vlan_101 on sub interface of R1 and create Vlan_102
> on
> > major interface of R6. ( use Fa0/0 )
> >
> >
> > vlan_101 = vlan 101
> > vlan_102 = vlan 102
> >
> > R1(fa 0/0 ) is connected to SW1 fa 0/1
> >
> > *Solution*
> >
> > <<SW1 >>
> > switchport trunk encapsulation dot1q
> > switchport mode trunk
> > switchport trunk allowed vlan 101,102
> > switchport trunk native vlan 102
> >
> >
> > <<R1>>
> > interface fa 0/0
> > ip address 192.168.1.102 255.255.255.0
> >
> > interface fa 0/0.17
> > encapsulation dot1q 17
> > ip address 192.168.101.1 255.255.255.248
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:07 ARST