From: Hobbs (deadheadblues@gmail.com)
Date: Thu Dec 04 2008 - 16:53:48 ARST
Use the distance command under the OSPF routing protocol process. 1 command
should do it.
On Thu, Dec 4, 2008 at 11:27 AM, GAURAV MADAN <gauravmadan1177@gmail.com>wrote:
> Hi friends
>
> I have following setup :
>
> r5------| =====r2 -----------rr
> |===== r1 ----------rr2
>
> <--EIGRP ------> <------ OSPF--->
>
> r5 , r1 , r2 in eigrp
> r1 , r2 , rr,rr2 in ospf
> hence r1 and r2 are ASBR also.
>
> I am asked to redistribute b/w 2 protocols and redistribution shd be such
> that EIGRP routes redistributed in OSPF on R2 should not go back in EIGRP
> via R1 .
> I am not allowed TAG in this .. (that I can do easily) .. I am asked to use
> administrative distance for the same .
>
> Can someone help me in this
>
> alas we dont have "match distance " or set distance " in route-maps.
>
> Gaurav Madan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:07 ARST