From: Luan Nguyen (luan@netcraftsmen.net)
Date: Wed Dec 03 2008 - 17:30:52 ARST
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_
paper0900aecd804dc7ae.pdf
One of the best publicly available 6500 QOS guide.
Internally, we have better of course :)
Luan Nguyen
Chesapeake NetCraftsmen, LLC.
www.NetCraftsmen.net
(aim/yahoo/gtalk): luancnc
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rookie Ccie
Sent: Wednesday, December 03, 2008 2:12 PM
To: ccielab@groupstudy.com
Subject: Fwd: 6500 QOS
Dear Experts,
Can any body share with me a working QOS config of a 6500 switch or the auto
generated commands in autoqos or point me towards a link
Below are details of the switch
*SUP - 720 running IOS 12.2(18)SXF14*
This IOS version does not support autoqos
*Line Card
*
sh interfaces gigabitEthernet 2/1 capabilities
GigabitEthernet2/1
Dot1x: yes
Model: WS-X6724-SFP
Type: 1000BaseLH
Speed: 1000
Duplex: full
Trunk encap. type: 802.1Q,ISL
Trunk mode: on,off,desirable,nonegotiate
Channel: yes
Broadcast suppression: percentage(0-100)
Flowcontrol: rx-(off,on,desired),tx-(off,on,desired)
Membership: static
Fast Start: yes
QOS scheduling: rx-(1q8t), tx-(1p3q8t)
CoS rewrite: yes
ToS rewrite: yes
Inline power: no
SPAN: source/destination
UDLD yes
Link Debounce: yes
Link Debounce Time: yes
Ports on ASIC: 1-12
Port-Security: yes
Regards
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:07 ARST