Fwd: 6500 QOS

From: Rookie Ccie (rookie.ccie@gmail.com)
Date: Wed Dec 03 2008 - 17:11:34 ARST

• Next message: Ronnie Angello: "Re: Spanning Tree on Doc CD"
• Previous message: Scott M Vermillion: "RE: Spanning Tree on Doc CD"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

 Dear Experts,

Can any body share with me a working QOS config of a 6500 switch or the auto
generated commands in autoqos or point me towards a link
Below are details of the switch

*SUP - 720 running IOS 12.2(18)SXF14*

This IOS version does not support autoqos

*Line Card
*
sh interfaces gigabitEthernet 2/1 capabilities
GigabitEthernet2/1
  Dot1x: yes
  Model: WS-X6724-SFP
  Type: 1000BaseLH
  Speed: 1000
  Duplex: full
  Trunk encap. type: 802.1Q,ISL
  Trunk mode: on,off,desirable,nonegotiate
  Channel: yes
  Broadcast suppression: percentage(0-100)
  Flowcontrol: rx-(off,on,desired),tx-(off,on,desired)
  Membership: static
  Fast Start: yes
  QOS scheduling: rx-(1q8t), tx-(1p3q8t)
  CoS rewrite: yes
  ToS rewrite: yes
  Inline power: no
  SPAN: source/destination
  UDLD yes
  Link Debounce: yes
  Link Debounce Time: yes
  Ports on ASIC: 1-12
  Port-Security: yes

Regards

Blogs and organic groups at http://www.ccie.net

• Next message: Ronnie Angello: "Re: Spanning Tree on Doc CD"
• Previous message: Scott M Vermillion: "RE: Spanning Tree on Doc CD"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:07 ARST