From: antonygrooves (antonygrooves@gmail.com)
Date: Mon Dec 01 2008 - 18:26:09 ARST
Well, Vlan 1 is another odd vlan of my vlan database, but in this case
is only useded in my scenario as native, so if i didnt place it in
the same instance as the other odd vlans it will be in the instance 0 as
a default, and here where im not sure to consider it as another odd vlan
or not.
I thought that i should place as another one odd no matter if im using
it explicity in my pod or not.
Does it make sense?
Thanks Scott.
Scott Morris wrote:
> Well, let's look at what you are asking....
>
> 1. Is the number "1" even or odd? That should answer that question.
>
> 2. Does the fact that it's a native vlan or not have any bearing on
> spanning tree?
>
> HTH,
>
>
> Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
> CCSI/JNCI-M/JNCI-ER
> Senior CCIE Instructor
>
> smorris@internetworkexpert.com
>
>
>
> Knowledge is power.
> Power corrupts.
> Study hard and be Eeeeviiiil......
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> antonygrooves
> Sent: Monday, December 01, 2008 1:29 PM
> To: ccielab@groupstudy.com
> Subject: MSTP odd Vlans and even Vlans, Where to place native vlan???
>
> Hi Gurus.
>
> I have a doubt regarding the native vlan when a tast ask me to create an
> instance for odd Vlans and another instance for even Vlans.
> Should i consider the vlan 1 (Native) as another Odd vlan and place it in
> the instance or shuldnt.
>
> Thanks for any help.
>
> Tony.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:07 ARST