From: Anthony Sequeira (asequeira@internetworkexpert.com)
Date: Sun Nov 30 2008 - 17:25:00 ARST
Yes - the priority command is used with Low Latency Queuing (LLQ) and
it specifies the amount of priority bandwidth to provide to a type of
traffic (typically Voice). This command also causes a POLICING to the
amount of bandwidth specified.
This is a mechanism to guard against queue starvation for other
traffic forms.
Anthony J. Sequeira, CCIE #15626, CCSI #23251
Senior CCIE Instructor
asequeira@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344
On Nov 30, 2008, at 1:33 PM, shank shank wrote:
> hello,
> quick question experts: does the priority command apply a
> maximum limit when specifying a bandwidth? or is it applying the
> minimum bandwidth certain class can get in the policy?
>
> so does this command priority 100 means that the maximum bandwidth
> the class will get is 100k?
>
>
> according to this link http://www.ciscosystems.com/application/pdf/paws/10100/priorityvsbw.pdf
> it does both. can anyone clarify this to me. thanks,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:32 ARST