From: Paul Adams (ccie.paul@gmail.com)
Date: Wed Nov 26 2008 - 09:38:28 ARST
Hi,
Can someone help me to understand why the serial 4 goes up for few seconds
and then goes down.....
frsw#sh interfaces serial 4
Serial4 is up, line protocol is down
Hardware is CD2430 in sync mode
Description: a R3 - S0/0/0
MTU 1500 bytes, BW 115 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 0, LMI stat recvd 0, LMI upd recvd 0
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0, DCE LMI down
LMI DLCI 0 LMI type is ANSI Annex D frame relay DCE
Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0
Last input 00:00:01, output never, output hang never
Last clearing of "show interface" counters 00:17:03
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/32 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
69 packets input, 1534 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 36 interface resets
0 output buffer failures, 0 output buffers swapped out
39 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
!
interface Serial4
description a R3 - S0/0/0
no ip address
encapsulation frame-relay
logging event subif-link-status
logging event dlci-status-change
clock rate 64000
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 301 interface Serial0 103
frame-relay route 302 interface Serial2 203
frame-relay route 304 interface Serial6 403
frame-relay route 305 interface Serial8 503
frame-relay route 306 interface Serial9 603
no shut
exit
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:32 ARST