From: Scott Morris (smorris@internetworkexpert.com)
Date: Tue Nov 25 2008 - 10:47:29 ARST
Well, if it says it stays valid UNTIL the beginning of the next minute would
that not take you TO 5pm?
4:59:59 is when it will end.
This has been discussed/debated a number of times over the years! If you
think the proctors will be concerned with it, ask them. The question is
simple, and clearly demonstrates you know the technology, so they should
answer it.
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ajay
mehra
Sent: Tuesday, November 25, 2008 6:30 AM
To: ccielab@groupstudy.com
Subject: time-range command
I need to permit access on weekdays from 8am to 5pm
what is the right command
periodic weekdays 7:59 to 16:59
or
periodic weekdays 8:00 to 17:00
R4(config)#time-range WEEKDAY
R4(config-time-range)#per weekdays 8:00 to ?
hh:mm Ending time - stays valid until beginning of next minute
Thanks,
Ajay
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:32 ARST