From: Tomi Amao (tomiground@hotmail.com)
Date: Tue Nov 11 2008 - 12:39:20 ARST
has anyone integrated cisco and polycom devices together before. need help
urgently
tryin to integrate the polycom se 200 with a cisco IOS gatekeeper
here is a snippet of the log that results when a cisco ip phone dials into the
polycom rmx 2000 (MCU)
Processing ARQ FindNetPath(): 64000 requested per side
GetResourcesForACall(): Call from Site Cisco Callmanager:(10.11.3.0) to
Site My Region:Primary Site:(10.11.5.0) GetResourcesForACall():
Direct Link Name = CCMtoDefault GetResourcesForACall(): Success !
FindNetPath(): Group Policy: IPOnlyAllowBitRateReduction. Max. Bitrate is
insufficient and cannot be decreased. IP Path with BW between Origin
10.11.3.15 and Dest 10.11.5.3 NOT found. Try next address **Error**:
ARJ sent.Sending ARJ 'rejectReason' 0 'resourceUnavailable' 0
the 10.11.3.15 address is the cisco call manager while the 10.11.5.3 is the
polycom rmx 2000 (MCU)
any help would be appreciated thank you
Tomi
CCIE #19627
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST