From: Tony Varriale (tvarriale@flamboyaninc.com)
Date: Sun Nov 09 2008 - 15:15:15 ARST
I would hire a qualified partner to assist you and your web team with this.
You not only need to understand ACE, network, apps, html, etc but you also
need to understand what the web team is doing. It's not something someone
can pick up in a month or 2.
tv
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Edouard Zorrilla
Sent: Sunday, November 09, 2008 6:29 AM
To: Edouard Zorrilla; amernas; ccielab@groupstudy.com
Cc: security@groupstudy.com
Subject: Re: ACE Sample Configs
Just to add, my company have bought two ace's along two chassis 6506 to
perform a load balancing and I need to set them up, the issue is that I have
never set up this before.
Regards
----- Original Message -----
From: "Edouard Zorrilla" <ezorrilla@tsf.com.pe>
To: "amernas" <taloust@gmail.com>; <ccielab@groupstudy.com>
Cc: <security@groupstudy.com>
Sent: Sunday, November 09, 2008 7:17 AM
Subject: Re: ACE Sample Configs
>I am a kind of confusing regarding this, for instance the command : " peer
>ip address X.X.X.14 255.255.255.0"
>
> It means I do not need to enter any command on the peer context which is
> working as a standby ? If so what do I need to enter on the peer context
> ?. Would you please unicast me with the config on both contexts ?
>
> Thanks a lot for your patience,
>
> Regards
>
> ----- Original Message -----
> From: "amernas" <taloust@gmail.com>
> To: "'Edouard Zorrilla'" <ezorrilla@tsf.com.pe>; <ccielab@groupstudy.com>
> Cc: <security@groupstudy.com>
> Sent: Sunday, November 09, 2008 7:02 AM
> Subject: RE: ACE Sample Configs
>
>
> Here is an example of the configuration of the primay ACE with 2 contexts
> RED-1 and BLUE-1
>
> ###################################
> .
> .
> hostname ACE-PRIMARY
> .
> .
> resource-class RED
> limit-resource all minimum 45.00 maximum equal-to-min
> resource-class BLUE
> limit-resource all minimum 45.00 maximum equal-to-min
> ..
> ..
> interface vlan 2
> description MANAGEMENT INTERFACE
> ip address X.X.X.13 255.255.255.0
> peer ip address X.X.X.14 255.255.255.0
> service-policy input ACE-MGMT-TRAFFIC
> no shutdown
>
> ft interface vlan 52
> description FAILOVER AND SYNC INTERFACE
> ip address X.X.X.1 255.255.255.0
> peer ip address X.X.X.2 255.255.255.0
> no shutdown
> .
> .
> context RED-1
> description RED-1 CONTEXT
> allocate-interface vlan 9
> allocate-interface vlan 30-31
> allocate-interface vlan 55
> member RED
>
> context BLUE-1
> description BLUE-1 CONTEXT
> allocate-interface vlan 7
> allocate-interface vlan 40-41
> allocate-interface vlan 50
> member BLUE
> .
> .
> ft peer 1
> heartbeat interval 1000
> heartbeat count 10
> ft-interface vlan 52
>
> ft group 1
> peer 1
> peer priority 90
> associate-context ADMIN-CONTEXT
> inservice
>
> ft group 2
> peer 1
> peer priority 90
> associate-context RED-1
> inservice
>
> ft group 3
> peer 1
> peer priority 90
> associate-context BLUE-1
> inservice
>
> ############################################
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Edouard Zorrilla
> Sent: Saturday, November 08, 2008 11:54 PM
> To: ccielab@groupstudy.com
> Cc: security@groupstudy.com
> Subject: ACE Sample Configs
>
>
> Anyone who has more real examples how to set up a ACE (Application Control
> Engine) module ? I found this :
>
>
http://www.cisco.com/en/US/products/ps6906/tsd_products_support_model_home.h
> t
> ml
>
> But I gues this is not enough since the examples do not show how to set up
> the standby module,
>
> Regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST